Production Stability
The right configuration should support repeatable performance across changing shifts, product batches, and normal operating fluctuations.
Intermitent Doypack Pouch Filling Machine through Spout
A rotary indexing platform that positions preformed spout pouches through filling, capping and discharge stations in a controlled sequence. Four servo-operated filling channels, automatic pouch loading and cap handling support consistent production.
Output
8-10 pouches/min/nozzle at 2-2.5 L
Filling
4 servo pump fillers
Pouch Format
Preformed centre-spout doypack
Controls
PLC with touchscreen HMI
Preformed pouches are automatically presented to holding fixtures on the rotary table. The indexing mechanism transfers each pouch step by step and holds the spout accurately below the filling nozzles.
Four servo-operated filling channels dispense product through the spout. An anti-drip arrangement helps control splashing and product loss before the pouch moves to automatic cap placement, torque-controlled capping and discharge.
Four servo-operated filling channels dispense product through the spout. An anti-drip arrangement helps control splashing and product loss before the pouch moves to automatic cap placement, torque-controlled capping and discharge.
| Feature | Specification |
|---|---|
| Machine type | Automatic rotary indexing type |
| Application | 2 litre preformed doypack / centre-spout pouch |
| Filling system | 4 filling nozzles with 4 servo pump fillers |
| Filling technology | Servo-operated piston filling |
| Output | 8-10 pouches/min/nozzle for 2-2.5 litre fills |
| Bag compatibility | Maximum width 230 mm; maximum length 300 mm |
| Product tank | 500 litres |
| Product contact parts | SS 304 / SS 316 as required |
| Power supply | 415 V AC, 3 phase, 50 Hz; approximately 8 kW connected load |
| Compressed air | 6 bar clean, dry air; approximately 0.8-1 m³/min |
| Operation | Automatic with PLC and touchscreen HMI |
| Safety | Emergency stop, guarding and sensor-based interlocks |
• Automatic conveyor-type pouch loading sequence.
• Rotary indexing with accurate positioning at each station.
• Four independent servo pump filling channels.
• Anti-drip nozzles with filling delay and timing adjustment.
• Automatic cap elevator, feeding conveyor and servo capping device.
• No-pouch-no-fill and no-cap-stop detection.
• HMI recipe settings, production counter and fault alarm display.
• Manual and automatic operating modes.
• Rotary indexing with accurate positioning at each station.
• Four independent servo pump filling channels.
• Anti-drip nozzles with filling delay and timing adjustment.
• Automatic cap elevator, feeding conveyor and servo capping device.
• No-pouch-no-fill and no-cap-stop detection.
• HMI recipe settings, production counter and fault alarm display.
• Manual and automatic operating modes.